Seslendirme


70 Dilde Yabancı Dil Seslendirme, Televizyon Reklam Filmleri, Kurumsal Tanıtım Filmleri, Radyo Reklam Spotları, Radyo Jingle ve Dj Jingle Servisi, Kapalı Devre Radyo, Mağaza Radyo, Mağaza Anons ve Kesintisiz Muzik Yayıncılık Sistemleri, IVR Seslendirme, Santral Anons ve Santral Seslendirme, Siyasi Parti Reklam ve Secim Kampanyaları.

Seslendirme projeleriniz icin şu alt başlıklarda sizlere hizmet sunmaktayız, Reklam Seslendirme, Santral Seslendirme, Tanıtım Filmi Seslendirme, Mağaza Anons Seslendirme, Haber Seslendirme, Perfore Seslendirme, Jingle Seslendirme, Secim Seslendirme, Yabancı Dil Seslendirme, Animasyon Seslendirme, E-Kitap Seslendirme, DJ Jingle Seslendirme, Tesis Anonsu Seslendirme, Sesli Mesaj Seslendirme, Medikal Seslendirme, Belgesel Seslendirme, Sponsorluk Seslendirme, IVR Seslendirme, Eğitim Filmi Seslendirme, Santral Anons Seslendirme. Temsil etitğimiz ve anlaşmalı olan seslendirme ekibimiz sanatcıları projelerinize hayat vermek icin sizleri bekliyor. En profesyonel yabancı dil seslendirme cozumlerine en uygun fiyatla sahip olmak istiyorsanız bize telefon, email veya canlı destek hattımız aracılığı ile ulaşmanız yeterli olacaktır.

Reklam Seslendirme Çalışmaları Kısa Sürede Teslim Edilir!

Reklam seslendirme çalışmasını gerçekleştirmek isteyen markalar, firmalar veya kişiler akıllarında olan fikirleri ya da yaratıcı bir düşünme sonunda elde ettiği sloganları hemen gerçeğe dönüştürerek bir reklam içinde duymak isterler. Bunun bilincinde olan firmamız en iyi şekilde değerlendirmelerini yapmak için radyo reklam seslendirme ve televizyon reklamlarını seslendirmede çok kısa sürede seslendirme çalışmasını tamamlayarak kayıtların teslim edilmesini sağlamaktadır. Son derece hızlı çıktı alınabilen teknik altyapımız sayesinde reklam seslendirmeye yönelik taleplerin bize gelmesinin ardından bir gün içerisinde seslendirmeyi teslim edebiliyoruz.

Çalışma şekli olarak firmamızın benimsediği yol öncelikle birebir görüşmelerle seslendirme hizmetinden neler beklendiğine yönelik olmaktadır. İki tarafın anlaşmalı şekilde seslendirme projesine ortak olmasından sonra reklamda seslendirilecek olan metinleri talep ediyor ve bir günlük süre içerisinde bu çalışmayı tamamlayarak sizlere dönüt verebiliyoruz. Sürekli olarak kullanılan reklam sloganlarınız veya seslendirme metinlerinizin mevcut olduğu durumlarda elektronik posta yerine sitemizi de kullanarak en hızlı şekilde bizlerle iletişime geçebilirsiniz.

Etkileyici Seslerle Televizyon Reklamlarında İlgi Çekin!

Televizyona yönelik olarak hazırlanan reklam filmleri ve tanıtımlarda daha çok görsel bir zemin üzerine bu reklamların hazırlanması söz konusu olduğu için pek çok kişi ses altyapısının nasıl hazırlanması gerektiğini arka planda bırakarak görsel odaklı bir etkileme yöntemini bulmaya gayret etmektedir. Oysa tv de en az radyo kadar seslendirmenin önemli olduğu bir alandır. Özellikle televizyon izleyicisinin çok farklı yönlerden uyarılarak reklamlardan etkilenmesini sağlamak için mutlaka televizyon reklam seslendirme çalışmalarında da profesyonel destek almak gerekiyor.

Seslendirme

reklam seslendirme

  ZR-1 Maintenance Tips

General Maintenance

by Jim VanDorn

 

The most common call we receive by far is from a confused ZR1 owner. After years of reading everything from which thermostat to use, to what type of spark plug is best, the average owner is totally and completely confused...and for good reason. There are many varied opinions of what is best for our cars but that may depend greatly on how you use your ZR1.

 

After seven years plus, many ZR1's are finally accruing some mileage. We have had the opportunity to closely inspect many engines with a variety of types of use from normal street driving to severe "weekend" use (track time). Compiling this information we can now offer the ZR1 owner some observations. One rule we've adopted after hearing so many owners say the same thing is the "DIMWIT" or "Darn, if I didn't Mess With IT" rule. In other words, if you didn't have a problem, then what are your intentions in the first place? To date, the only company known to have a fleet of engineering ZR1's to test with was GM and it's affiliates.

 

Therefore, we must ask ourselves if their suggested procedures and parts recommendations should have a considerable amount of merit. Obviously they do, but on the other hand, there are no doubt areas for improvement. Although we will begin our segment discussing the routine and normal maintenance of the ZR1, there are many areas where an upgrade will be suggested.

 

Please understand that these are personal opinions and experiences and are not intended to conflict with service procedures outlined in the appropriate service manual.


  Articles
Procedure:
Removing the clutch is a fairly straight forward process.
This took me a total of two hours doing it alone. I could have done it in less time but I am in no rush.
  1. Remove exhaust system. I removed the header bolts first and then worked toward the rear removing supports. That way, when it came time to remove the last nuts on the mufflers, I was simply able to grab them and give a pull to get the system off. I was able to slide the whole assembly out the back.
  2. Remove u-joint bolts on driveline. Easy enough but it is nice if you have someone to work the emergency brake when you turn the wheels to get a good shot on the bolts.
  3. Support engine with a jack or the like under the oil pan.
  4. Remove forward bolts from C brace. 19 mm lower bolt head with an 18 mm upper nut. It is a tight squeeze but even folks with fat hands can get up there.
  5. Remove rear bolts from C beam brace. 22 mm both for the lower bolt head and the upper nut.
  6. Remove all the caulk from your hands and bolts. It's like that old movie, The Blob, it just gets on everything
  7. To get everything out easier, go to the differential and support it. I used a transmission jack but a scissor jack will work fine. Now, remove one of the bolts from the Differential Carrier on one side. The DC is the long arms that go out from the diff and attach to the frame. Now slowly release the tension on the jack and let the carrier come down some. This will give you plenty of room.
  8. Now with some of the tension relieved, you can use a screwdriver to move the C beam support around and give you some room to work with the driveshaft.
  9. Remove the driveshaft by pressing in towards the transmission and the rear should come out easily. Now pull it from the transmission. You will get some oil leaking from the end of the transmission so have a pan ready to catch it.
  10. This now really opens up the tunnel and the C bean support can easily come out now.
  11. Now you move to the interior of the car and remove the shift knob. You take a very small common screwdriver, protect the leather, and insert it between the leather and the metal shift pattern piece. Work it out slowly and everything will be fine. Now, in case you have not seen it, the shift knob has a metal key in there. Just get a screwdriver and pop this out. Then you can unscrew the knob. Once that is unscrewed, you need to unscrew the tiny little allen set screw on the reverse lockout (if you have one). Now you are finished in the interior. A time saver here is to have the shifter in 3rd gear.
  12. Back on your head now. Underneath you need to disconnect the electrical connections.
  13. Now this is optional, but I chose to remove the clutch slave now. It kinda hangs around and gets in the way a bit now, but when you begin to drop the transmission, you will be glad you did take it off.
  14. Support the transmission with something. If you are doing this without the help of a transmission jack, use a scissor jack.
  15. Start removing the bolts holding the transmission to the bell housing. Heat and vibration have a tendency to make these stick so you may need a breaker bar. The bolts themselves are 15mm and there are 5 of them to remove. Start with the bottom ones and work towards the top.
  16. With the final bolts removed, you have to slowly work the transmission off. You do this by slowly letting down on the engine support and the transmission support. This angles the transmission a bit towards the back. Get your bucket ready to catch some fluid coming out the end.
    OK, so you are slowly letting down both supports. You can do a little twist of the transmission or you can pry it open just a bit taking care not to damage the aluminum facing. Work it back slowly. Let it down more, work it back, and repeat. Finally, what will happen is that there will be no more support under the engine and you need to just work it a bit and the shifter will come out of the interior hole. Once that happens, you can just slide the transmission off of the shaft.
  17. Slide the transmission out from under the car and clean up the mess you made with the transmission fluid leaking everywhere.
  18. All that is left now to get to is the bell housing. First, remove the plate on the front of the bell housing. There are 3 10mm bolts holding it on. Next, remove the bell housing bolts. The bolts here are 13mm. When removing them, just take care not to remove the ground bolts that are on the back of the engine. You will see one on each side with several wires running to it.
  19. With all the bolts removed, you can take off the bell housing. Now you may have a bit of a go with it because of the clutch forks but with a bit of patience, you can work it off and the housing can be easily removed.
  20. The easiest part now is simply removing the clutch and flywheel. It is there with no tricks or surprises so I won't go into that.
 

Related Articles:

Jacking up the ZR-1. Scott Fabre

How to Jack-up a ZR-1. Michael Hom

 
Author: Jim Milstead
 
Posted in: Drivetrain, Clutch
Post Comment
Only registered users may post comments.
  Disclaimer

The information contained in this website is for general information purposes only. Whilst we endeavor to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this website.

Through this website there are links to other websites which are not under the control of the ZR-1 Net Registry. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Read the full Disclaimer...

©2024 ZR-1 NET Registry   |  Privacy Statement