All Articles
Symptoms:
This problem can show itself by an interior light staying on and draining the battery, or sometimes by the alarm triggering several minutes after locking the car.

Tools Required:
Plastic Wire Cutters
 

Procedure:

To fix the door switch it was removed. This resulted in the backing ring falling inside the door. The correct procedure for removing the switch can be found in the FSM.

 

 

 

 

 


Next the black plastic door plunger pin was pulled outwards using a pair of wire cutters (Do not cut!). The pin will come out slightly and fix the problem. If not, purchase a replacement switch and replace.




Originally author: ZR-Juan
 
Posted in: Body, Electrical
Actions: E-mail | Permalink |
  Disclaimer

The information contained in this website is for general information purposes only. Whilst we endeavor to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this website.

Through this website there are links to other websites which are not under the control of the ZR-1 Net Registry. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Read the full Disclaimer...

©2019 ZR-1 NET Registry   |  Privacy Statement