Articles

The thermostat is behind the lower part of the radiator on the passenger side. It's easier to jack up the car and remove the right front wheel. The job would be easy except there's a bracket attached to a frame cross member that goes to the housing, so you also have to remove that to get the thermostat out. I used a crowfoot wrench to get one of those bracket bolts out.

 

The taper side side of the thermostat goes toward the radiator. To get the thermostat centered start the bolts to the housing. Taking the short piece of hose off the housing that goes to the radiator helps. Then reattach the bracket to the frame later after you check for leaks.

 

Related Articles:

Jacking up the ZR-1. Scott Fabre

How to Jack-up a ZR-1. Michael Hom

Actions: E-mail | Permalink |
  Disclaimer

The information contained in this website is for general information purposes only. Whilst we endeavor to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this website.

Through this website there are links to other websites which are not under the control of the ZR-1 Net Registry. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Read the full Disclaimer...

©2017 ZR-1 NET Registry   |  Privacy Statement