|
|
 |
Maintenance
Project- Coolant Change
Last Update:
08/03/2005
by Scott Fabre
I changed the radiator fluid......it's dex cool.
Notice how clear the Dex Cool is after two years of use. No
sludge as was reported by some. I don't get it. Why do some people
have problems with sludge but others do not?
This is the lock washer type I used on the oil condenser cover
under the plenum. The bolts were not even finger tight. They had
vibrated out about 1/8 in ! Oil was leaking out the V through the
drain tube. I placed a rubber cap over the drain tube for a few
weeks until I could get around to pulling the plenum. I had used
loctite before but evidently it did not work.
|
 |
 |
 |
| |
Disclaimer: Repairs and techniques are
reported here by amateurs and professionals as an
informational opinion service only and should not be
attempted by other than factory trained and certified
technicians. The ZR1 Net does not recommend anyone doing
these procedures and is not responsible for any adverse
outcome. Factory repair manuals should always be used and
followed to the letter in conjunction with any repair or
maintenance performed. All cautions and warnings that appear
in the factory manuals apply here as well. As recommended in
all service manuals, proper eye and body protection as well
as proper tools must be used for any maintenance performed
by individuals. Working on automobiles is dangerous and
could result in personal and/or property injury. If you do
not have the proper tools or know-how, you should not do any
of these procedures, but have a qualified technician perform
the work. |
|
 |
 |
 |
|
