Seslendirme


70 Dilde Yabancı Dil Seslendirme, Televizyon Reklam Filmleri, Kurumsal Tanıtım Filmleri, Radyo Reklam Spotları, Radyo Jingle ve Dj Jingle Servisi, Kapalı Devre Radyo, Mağaza Radyo, Mağaza Anons ve Kesintisiz Muzik Yayıncılık Sistemleri, IVR Seslendirme, Santral Anons ve Santral Seslendirme, Siyasi Parti Reklam ve Secim Kampanyaları.

Seslendirme projeleriniz icin şu alt başlıklarda sizlere hizmet sunmaktayız, Reklam Seslendirme, Santral Seslendirme, Tanıtım Filmi Seslendirme, Mağaza Anons Seslendirme, Haber Seslendirme, Perfore Seslendirme, Jingle Seslendirme, Secim Seslendirme, Yabancı Dil Seslendirme, Animasyon Seslendirme, E-Kitap Seslendirme, DJ Jingle Seslendirme, Tesis Anonsu Seslendirme, Sesli Mesaj Seslendirme, Medikal Seslendirme, Belgesel Seslendirme, Sponsorluk Seslendirme, IVR Seslendirme, Eğitim Filmi Seslendirme, Santral Anons Seslendirme. Temsil etitğimiz ve anlaşmalı olan seslendirme ekibimiz sanatcıları projelerinize hayat vermek icin sizleri bekliyor. En profesyonel yabancı dil seslendirme cozumlerine en uygun fiyatla sahip olmak istiyorsanız bize telefon, email veya canlı destek hattımız aracılığı ile ulaşmanız yeterli olacaktır.

Reklam Seslendirme Çalışmaları Kısa Sürede Teslim Edilir!

Reklam seslendirme çalışmasını gerçekleştirmek isteyen markalar, firmalar veya kişiler akıllarında olan fikirleri ya da yaratıcı bir düşünme sonunda elde ettiği sloganları hemen gerçeğe dönüştürerek bir reklam içinde duymak isterler. Bunun bilincinde olan firmamız en iyi şekilde değerlendirmelerini yapmak için radyo reklam seslendirme ve televizyon reklamlarını seslendirmede çok kısa sürede seslendirme çalışmasını tamamlayarak kayıtların teslim edilmesini sağlamaktadır. Son derece hızlı çıktı alınabilen teknik altyapımız sayesinde reklam seslendirmeye yönelik taleplerin bize gelmesinin ardından bir gün içerisinde seslendirmeyi teslim edebiliyoruz.

Çalışma şekli olarak firmamızın benimsediği yol öncelikle birebir görüşmelerle seslendirme hizmetinden neler beklendiğine yönelik olmaktadır. İki tarafın anlaşmalı şekilde seslendirme projesine ortak olmasından sonra reklamda seslendirilecek olan metinleri talep ediyor ve bir günlük süre içerisinde bu çalışmayı tamamlayarak sizlere dönüt verebiliyoruz. Sürekli olarak kullanılan reklam sloganlarınız veya seslendirme metinlerinizin mevcut olduğu durumlarda elektronik posta yerine sitemizi de kullanarak en hızlı şekilde bizlerle iletişime geçebilirsiniz.

Etkileyici Seslerle Televizyon Reklamlarında İlgi Çekin!

Televizyona yönelik olarak hazırlanan reklam filmleri ve tanıtımlarda daha çok görsel bir zemin üzerine bu reklamların hazırlanması söz konusu olduğu için pek çok kişi ses altyapısının nasıl hazırlanması gerektiğini arka planda bırakarak görsel odaklı bir etkileme yöntemini bulmaya gayret etmektedir. Oysa tv de en az radyo kadar seslendirmenin önemli olduğu bir alandır. Özellikle televizyon izleyicisinin çok farklı yönlerden uyarılarak reklamlardan etkilenmesini sağlamak için mutlaka televizyon reklam seslendirme çalışmalarında da profesyonel destek almak gerekiyor.

Seslendirme

reklam seslendirme

  Articles
Procedure:
  1. Disconnect battery
  2. Remove the lid on the rear deck of the car. Remove the fuel filler cap. Slide the rubber boot over the fuel filler neck. Be careful not to tear the boot. Remove the 10 or 12 bolts that attach the fuel filler neck to the tank.
  3. Grab the fuel filler neck and carefully twist and lift the pumps out of the tank. The pumps are all attached to the fuel filler. Be careful not to bend the rod on the float for the fuel filler gauge. Make sure to install new fuel strainers on bottom of pumps.
  4. When you remove the old pumps from the module, and install the new pumps make sure you use new clamps and that all of the rubber hoses that connect to the fuel pumps are in good shape and be careful not to crimp any of the hoses that would restrict fuel flow. Also get an ohm meter and check the resistance on all of the wire connections to make sure the pumps are getting current.
  5. When re-installing you have to carefully twist and turn to get the pumps and the pump housing installed back into the tank. Once you get everything in the tank firmly push down to seat the fuel strainers on the bottom of the tank. make sure to use a new gasket where the fuel filler neck bolts to the tank and tighten it up.
  6. Did not notice any fuel mileage degradation cruising around. Noticed a big difference running balls out.
  7. However I had a weak secondary pump to start with.
  8. Once you get it back together do a fuel pressure check as follows:
    1. Remove primary pump fuse on side passenger side panel. Attach fuel pressure gauge. Turn ignition on (but don't start motor) this tests the secondary pump. You should have about 50 to 60 psi. Before I replaced the pumps I only had 38 lbs on this pump. After replacing the pump I had about 55 lbs of pressure.
    2.  Bleed off pressure from gauge. Reinstall primary pump fuse. Remove secondary pump fuse. This is under the passenger side of the dash board. It is a bitch to get at. Read the owners manual for more details on this fuse. Do the process I mention above to test the primary pump now. Before I replaced the pump I had 45 lbs, now this pump has 55 lbs as well.
  9. Last change the fuel filter. It is on the underside of passenger side of car.
With engine running fuel pressure should be at or around 42 to 50 psi.
Fuel Pump part numbers:
GM Part #25163473 ($72) *Fits '96 Suburban with 454 Engine
Airtex - E3904 ($69) (800 424 7839)
Master- E3265 ($69)
Neihoff - P36 (it also has BWD P36 on it) ($65)
I would recommend the Master brand over the Airtex but if you can get the Neihoff do that. It's internal parts are all metal. The Airtex one failed on me a month after putting it in. It also has a wiring harness change over you have to do. The Master and Neihoff are a drop in replacements.
As per Scott Fabre
Also note you can buy fuel pumps at most auto parts store like Autozone which sells them for $50-$65. The part number is 3940 however the 3904 has a different electrical connector than the original pump. You can use the 3265 which is the replacement for the LT1 engine, but it has the same connector as the original LT5 pump. They also have the sock filters as well. They are made by airtech. Airtech supplies them for GM and GM stamps their own delco logo and part number on them. You can also use 3270 part number as well.
Author: Glenn Richardson
 
Actions: E-mail | Permalink |
  Disclaimer

The information contained in this website is for general information purposes only. Whilst we endeavor to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this website.

Through this website there are links to other websites which are not under the control of the ZR-1 Net Registry. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Read the full Disclaimer...

©2024 ZR-1 NET Registry   |  Privacy Statement